AMTEC Industries
| PRODUCT |
DESCRIPTION |
| TURBO+ |
Traffic film remover and jet wash detergent |
| POLYWAX |
Car shine polymer rinse aid. |
| SURECLEAN |
Heavy duty, highly effective hard surface cleaner. |
| TRANSFORM |
Automatic vehicle brush wash cleaning additive. |
| CLEARWAY |
Reversible anti graffiti coating |
| G-SOLVE |
Engine parts emulsifying degreasing solvent |
| TYRE DRESSING |
Water based tyre shine
|
MATERIAL SAFETY DATA SHEET.
1.IDENTIFICATION
OF PRODUCT AND COMPANY
Product name :
Turbo+ traffic film remover and jet wash detergent
Company : AMTEC Industries, 1 West End Units, Charlesfield Trading
Estate,
St. Boswells, Melrose, TD6 0HH.
Tel: +44 (0)1835 823750, Fax: +44 (0)8707 052228
2. COMPOSITION/ HAZARDOUS INGREDIENTS
Ingredient name
Cas No.
Contents
Classification
Sodium metasilicate
6834-92-0
<10%
C;R34-37
Trisodium Nitrolotriacetate
5064-31-3
<20%
Xi;R36
3. HAZARD IDENTIFICATION
On available data this preparation
is not required to carry a hazard classification according
to EEC directives 88/379/EEC and 79/831/EEC.
This product may cause soreness and
irritation in contact with eyes.
Prolonged contact with skin may result
in irritation.
4. FIRST AID MEASURES
Exposure route
Symptoms
Treatment
Inhalation
|
Mists
may irritate the breathing passages,
|
Remove
from exposure, rest and keep warm. In severe cases or if recovery is not
rapid or complete seek medical attention.
|
Skin Contact
|
Slight irritation.
|
Drench the skin with plenty of clean water. Remove contaminated clothing
and wash before reuse. If irritation persists seek medical attention.
|
Eye contact
|
Irritation.
|
Irrigate thoroughly with water for at least 10 minutes. Obtain medical
attention.
|
Ingestion
|
Irritation of the digestive tract.
|
Wash out the mouth with water. Do not induce vomiting. If patient is conscious
give water to drink. If patient feels unwell seek medical attention.
|
5.
FIRE FIGHTING MEASURES
This preparation
is stable and non-combustible.
6.
ACCIDENTAL RELEASE MEASURES
Safety
precautions : Wear appropriate PPE - see section 8.
Environmental
: Prevent entry into drains and water courses.
Clean
up procedures : Spillage's should be contained using soil or other adsorbent
material to
prevent contamination
of drains and water courses. Waste from spillage's should be disposed of
in
accordance
to local regulations.
Spilled material
may cause surfaces to become slippery.
7.
HANDLING AND STORAGE
Store securely
in labeled containers.
Keep out of
reach of children.
Protect
from freezing
8.
EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure
controls : Respiratory protection is not normally required but if spraying
applications are
involved
in a confined area appropriate masks should be worn.
Personal
protection : Respiratory, wear a simple mask to prevent inhalation
of liquid as a vapour.
Hands
, the use of suitable PVC gloves is recommended.
Eyes,
safety glasses or goggles, (BS2902).
Skin.
Apron, overalls
Hygiene
. Always wash thoroughly after handling chemicals.
9.
PHYSICAL AND CHEMICAL PROPERTIES
State
:
Liquid
Colour
:
Blue
pH-value
:
>12
Boiling
point : 100oC
Flash
point :
Aqueous solution, not flammable.
Solubility
:
Miscible in all proportions.
Density
@ 25oC :
Odour
:
Slight characteristic.
10.
STABILITY AND REACTIVITY
This product
is stable in excess of one year when stored between 5OC and 30
OC.
11.
TOXICOLOGICAL INFORMATION
Effects
: Harmful if swallowed. Irritating to the eyes, may cause slight temporary
irritation by all
other routes
of exposure.
12.
ECOLOGICAL INFORMATION
Soluble in water, readily biodegradable. Do
not release the concentrate into surface waters.
13. DISPOSAL CONSIDERATIONS
The product is not classified as hazardous waste.
Disposal of large quantities as waste must always comply with existing
EEC, national and
local regulations. Registered waste carriers and licensed disposal sites
must be used.
14. Transport considerations
Not classified as hazardous for transportation
according to international regulations.
15. REGULATORY INFORMATION
This preparation does not carry a hazard classification
according to EEC directives
88/379/EEC, 67/548/EEC and 79/831/EEC.
16. OTHER INFORMATION
This material is usually used for washing traffic
film from vehicles and for cleaning contaminated
hard surfaces.
The information contained in this data sheet does not constitute an assessment
of workplace risks.
BACK TO TOP
BACK TO INDEX PAGE
MATERIAL
SAFETY DATA SHEET.
1.
IDENTIFICATION OF PRODUCT AND COMPANY
Product
name : POLYWAX polymer rinse aid additive
Company : AMTEC Industries, 1 West End Units,
Charlesfield Trading Estate,
St. Boswells, Melrose, TD6 0HH.
Tel: +44 (0)1835 823750, Fax: +44 (0)8707 052228
2. COMPOSITION/ HAZARDOUS INGREDIENTS
Ingredient name
Cas No.
Contents
Classification
Nonionic detergent
n/a
<15%
n/a
Amides, Coco, N-N-bis
ethyl
68603-42-9
<5%
Xi;R36/38
Polymer wax
5064-31-3
<5%
n/a
On available
data this preparation is not required to carry a hazard classification
according
to EEC directives
88/379/EEC and 79/831/EEC.
This product
may cause soreness and irritation in contact with eyes.
Prolonged
contact with skin may result in irritation.
4.
FIRST AID MEASURES
Exposure route
Symptoms
Treatment
Inhalation
|
Mists may irritate the breathing passages,
|
Remove from exposure, rest and keep warm. In severe cases or if recovery
is not rapid or complete seek medical attention.
|
Skin Contact
|
Slight irritation.
|
Drench the skin with plenty of clean water. Remove contaminated clothing
and wash before reuse. If irritation persists seek medical attention.
|
Eye contact
|
Irritation.
|
Irrigate thoroughly with water for at least 10 minutes. Obtain medical
attention.
|
Ingestion
|
Irritation of the digestive tract.
|
Wash out the mouth with water. Do not induce vomiting. If patient is conscious
give water to drink. If patient feels unwell seek medical attention.
|
5. FIRE FIGHTING MEASURES
This preparation is stable and non-combustible.
6. ACCIDENTAL RELEASE MEASURES
Safety precautions : Wear appropriate PPE - see section 8.
Environmental : Prevent entry into drains and water courses.
Clean up procedures : Spillage's should be contained using soil or
other adsorbent material to
prevent contamination of drains and water courses. Waste from spillage's
should be disposed of in
accordance to local regulations.
Spilled material may cause surfaces to become slippery.
7. HANDLING AND STORAGE
Store securely in labeled containers.
Keep out of reach of children.
Protect from freezing
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure controls : Respiratory protection is not normally required
but if spraying applications are
involved in a confined area appropriate masks should be worn.
Personal protection : Respiratory, wear a simple mask to prevent
inhalation of liquid as a vapour.
Hands, the use of suitable PVC gloves is recommended.
Eyes, safety glasses or goggles, (BS2902).
Skin. Apron, overalls
Hygiene. Always wash thoroughly after handling chemicals.
9. PHYSICAL AND CHEMICAL PROPERTIES
State :
Liquid
Colour :
Pink
pH-value :
7
Boiling point : 100oC
Flash point : Aqueous solution,
not flammable.
Solubility :
Miscible in all proportions.
Density @ 25oC
:
Odour :
Slight characteristic.
10. STABILITY AND REACTIVITY
This product is stable in excess of one year when stored between 5
O C and 30OC.
11. TOXICOLOGICAL INFORMATION
Effects : Harmful if swallowed. Irritating to the eyes, may cause slight
temporary irritation by all
other routes of exposure.
12. ECOLOGICAL INFORMATION
Soluble in water, readily
biodegradable. Do not release the concentrate into surface waters.
13. DISPOSAL CONSIDERATIONS
The product is not classified
as hazardous waste.
Disposal of large quantities as waste must always comply with existing
EEC, national and
local regulations. Registered waste carriers and licensed disposal sites
must be used.
14. Transport
considerations
Not classified as hazardous
for transportation according to international regulations.
15. REGULATORY
INFORMATION
This preparation does
not carry a hazard classification according to EEC directives
88/379/EEC, 67/548/EEC and 79/831/EEC.
16. OTHER INFORMATION
This material is usually
used for washing traffic film from vehicles and for cleaning contaminated
hard surfaces.
The information contained in this data sheet does not constitute an assessment
of workplace risks.
BACK TO TOP
BACK TO INDEX PAGE
MATERIAL
SAFETY DATA SHEET.
1.
IDENTIFICATION
OF PRODUCT AND COMPANY
Product name :
G-SOLVE
engine parts emulsifying
solvent degreaser
Company
:
AMTEC Industries, 1 West End Units, Charlesfield Trading
Estate,
St. Boswells, Melrose, TD6 0HH.
Tel: +44 (0)1835 823750, Fax: +44 (0)8707 052228
2.
COMPOSITION/
HAZARDOUS INGREDIENTS
A
blend of petroleum
distillate solvent with non
ionic emulsifiers, providing
a self separating emulsion
with water
Ingredient
name
Cas No.
Contents
Classification
Risk
EMULSIFIER
<6%
Xi
R36/38
ALIPHATIC HYDROCARBON >80%
F
R10
3.
HAZARD
IDENTIFICATION
On available data
this preparation
does not carry a hazard
classification according to
EEC directives 88/379/EEC
and 79/831/EEC.
This product is
flammable flash point
131 oF
This product may
cause soreness in contact
with eyes.
Prolonged contact
with skin may result in
irritation.
4.
FIRST AID MEASURES
Eye contact :
Wash out with copious
amounts of water.
If irritation
persists seek medical
advice.
Skin
contact :
Wash off with soap
and water.
Ingestion
:
Wash out the mouth
with water. Obtain medical
advice.
Inhalation
:
Move the exposed
person into fresh air and
get prompt medical
attention.
5.
FIRE FIGHTING
MEASURES
This preparation is
flammable and will burn if
ignited. Use extinguishing
media appropriate
for solvent fires.
6.
ACCIDENTAL RELEASE
MEASURES
Spillages should be
contained using soil or
other adsorbent material to
prevent
contamination
of
drains and water
courses. Waste material from
spillages should be disposed
of according to local
regulations. Spilled
material may cause surfaces
to become slippery. Clean-up
personnel should
use respiratory
and/or liquid contact
protection.
7.
HANDLING AND
STORAGE
Store securely in the
original labeled containers
out of reach of children.
Keep in cool, dry
well ventilated conditions
away from heat sparks and
open flames.
8.
EXPOSURE CONTROLS
/ PERSONAL PROTECTION
Exposure
controls :
Respiratory
protection is not normally
required but if
spraying
applications are
involved appropriate masks
should be worn.
Ensure
sufficient local exhaust
ventilation
Personal
protection :
Respiratory,
wear a gas mask filter A, to
prevent inhalation of liquid
as a vapour.
Hands, the use
of suitable gloves is
recommended.
Eyes, safety
glasses or goggles,
(BS2902).
Skin. Apron,
overalls
9.
PHYSICAL AND
CHEMICAL PROPERTIES
State
:
Liquid.
Flash
point
:
131oF
Colour
:
Green
Solubility
:
water miscible
pH-value
:
N/A
Density
@ 25oC
:
0.85
Boiling
point
:
120oC
Odour :
Solvent
10.
STABILITY AND
REACTIVITY
This product is
stable in excess of
one year when stored
between 5OC and
30OC.
11.
TOXICOLOGICAL
INFORMATION
This
preparation does not carry a
hazard classification.
12.
ECOLOGICAL
INFORMATION
No data available.
Do not release into
surface waters.
13.
DISPOSAL
CONSIDERATIONS
The product is not
classified as hazardous
waste.
Disposal of large
quantities as waste must
always comply with existing
EEC,
national and
local regulations.
Registered waste carriers
and licensed disposal sites
must be used.
14.
Transport
considerations
ADR/RID
:
Class
:
3.41
Item
:
Name
:
Petroleum distillate
IMDG
:
Class :
3.3
UN-nr.
: 1268
Proper shipping name
: Petroleum
distillate NOS
Label :
3
Marine pollutant
: ---/No
EMS
MFG
ICAO/IATA
:
Class
:
3
UN-nr.
: 1268
Proper shipping name
: Petroleum
distillate NOS
Label :
RFL
15.
REGULATORY
INFORMATION
15.1
Classification
:
Petroleum distillate,
flammable
15.1
Labelling
:
Flammable liquid
15.2
Symbol (s)
:
15.3
R-phrases
:
R - 10,
Flammable
15.4
S-phrases
:
S - 16,
Keep away from
sources of ignition. No
smoking.
S - 25,
Avoid contact with
eyes.
S - 26,
In case of contact
with eyes, rinse immediately
with plenty of
water
and seek medical advice.
16.
OTHER INFORMATION
BACK TO TOP
BACK TO INDEX PAGE
MATERIAL SAFETY DATA SHEET.
1.IDENTIFICATION OF PRODUCT AND COMPANY
Product name : SURECLEAN heavy duty hard surface cleaner.
Company : AMTEC Industries,
1 West End Units, Charlesfield Trading Estate,
St. Boswells, Melrose, TD6 0HH.
Tel: +44 (0)1835
823750, Fax: +44 (0)8707 052228
2. COMPOSITION/
HAZARDOUS INGREDIENTS
Ingredient name
Cas No.
Contents
Classification
Sodium metasilicate
6834-92-0
<10%
C;R34-37
3. HAZARD IDENTIFICATION
On available data this preparation is not required to carry a hazard
classification according
to EEC directives 88/379/EEC and 79/831/EEC.
This product may cause soreness and irritation in contact with eyes.
Prolonged contact with skin may result in irritation.
4. FIRST AID MEASURES
Exposure route
Symptoms
Treatment
Inhalation
|
Mists may irritate the breathing passages,
|
Remove from exposure, rest and keep warm. In severe cases or if recovery
is not rapid or complete seek medical attention.
|
Skin Contact
|
Slight irritation.
|
Drench the skin with plenty of clean water. Remove contaminated clothing
and wash before reuse. If irritation persists seek medical attention.
|
Eye contact
|
Irritation.
|
Irrigate thoroughly with water for at least 10 minutes. Obtain medical
attention.
|
Ingestion
|
Irritation of the digestive tract.
|
Wash out the mouth with water. Do not induce vomiting. If patient is conscious
give water to drink. If patient feels unwell seek medical attention.
|
5. FIRE FIGHTING MEASURES
This preparation is stable and non-combustible.
6. ACCIDENTAL RELEASE MEASURES
Safety precautions : Wear appropriate PPE - see section 8.
Environmental : Prevent entry into drains and water courses.
Clean up procedures : Spillage's should be contained using soil or
other adsorbent material to
prevent contamination of drains and
water courses. Waste from spillage's should be disposed of in
accordance to local regulations.
Spilled material may cause surfaces
to become slippery.
7. HANDLING AND STORAGE
Store securely in labeled containers.
Keep out of reach of children.
Protect from freezing
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure controls : Respiratory protection is not normally required
but if spraying applications are
involved in a confined area
appropriate masks should be worn.
Personal protection : Respiratory, wear a simple mask to prevent
inhalation of liquid as a vapour.
Hands, the use of suitable PVC gloves is recommended.
Eyes, safety glasses or goggles, (BS2902).
Skin. Apron, overalls
Hygiene. Always wash thoroughly after handling chemicals.
9. PHYSICAL AND CHEMICAL PROPERTIES
State :
Liquid
Colour :
Yellow
pH-value :
>12
Boiling point : 100oC
Flash point : Aqueous solution,
not flammable.
Solubility :
Miscible in all proportions.
Density @ 25oC
:
Odour :
Slight pine
10. STABILITY AND REACTIVITY
This product is stable in excess of one year when stored between 5
O C and 30OC.
11. TOXICOLOGICAL INFORMATION
Effects : Harmful if swallowed. Irritating to the eyes, may cause slight
temporary irritation by all
other routes of exposure.
12. ECOLOGICAL INFORMATION
Soluble in water, readily biodegradable. Do not release the concentrate
into surface waters.
13. DISPOSAL CONSIDERATIONS
The product is not classified as hazardous waste.
Disposal of large quantities as waste must always comply with existing
EEC, national and
local regulations. Registered waste carriers and licensed disposal sites
must be used.
14. Transport considerations
Not classified as hazardous for transportation according to international
regulations.
15. REGULATORY INFORMATION
This preparation does not carry a hazard classification according to EEC
directives
88/379/EEC, 67/548/EEC and 79/831/EEC.
16. OTHER INFORMATION
This material is usually used for washing traffic film from vehicles and
for cleaning contaminated
hard surfaces.
The information contained in this data sheet does not constitute an assessment
of workplace risks.
BACK TO TOP
BACK TO INDEX PAGE
MATERIAL
SAFETY DATA SHEET.
1.
IDENTIFICATION OF PRODUCT AND
COMPANY
Product name : CLEARWAY
ANTI-GRAFFITTI
Water based sacrificial building protection coatings.
Company
:
AMTEC Industries,
1 West End Units, Charlesfield Trading Estate,